High Speed Needling Punching Nonwoven Textile Fabric Needle Loom
Machine
- The first part is the body part. The frame adopts a new splicing
structure, which is divided into three parts: upper beam, middle
beam and lower beam. Through the way of separation can be better,
accurate processing.
- The second part is the spindle drive part. The spindle is connected
in sections. Each spindle unit has two bearing seats fixed on both
sides of the eccentricity and two balance flywheels fixed on both
sides. In this way, the force of the spindle on both sides of the
connecting rod is uniform, which is a very good balance structure.
- The third part is the raising part. The main purpose of the
needling machine is to design the traditional high speed needling
machine into a needling bed composed of a brush.
- The fourth part is the main technical indicators of the equipment.
Upon completion of manufacturing, the equipment shall achieve the
following performance and technical indicators through synthesis
and testing: low noise, low vibration and smooth operation.
Technical parameters:
| Working width | 1500-8800mm |
| Needle stroke | 30-70mm |
| Needle density | 3000n/m-7000n/m |
| Needle frequency | Max. 1300rpm |
| Machine type | Single shaft single board, double shaft single board, double shaft
double board |
| Installed power | Depends on the product requests. |
| Line speed | 1-10m/min |
| Needle board | Aluminum-Magnesium alloy plate |
Structure characteristics:
a) Frame structures, to form by high quality armor plate welding.
b) It adopts single principle axis structure with single needle
board.
c) Needle beam, working beam are high temperature shaped and
precision processed.
d) Materials of main shaft adopt alloy steel, and made finely after
high quality finishing.
e) The lifting and dropping of the bottom plate and stripper plate
is controlled by electromotor and scale display.
f) Needle plate adopts Aluminum-Magnesium alloy plate, three plates
with irregular computerized perforating.
g) The bottom plate and stripping plate with surface plated by hard
chromium and polished.
h) Input and output roller with surface chrome-plated and
controlled by separate frequency conversion.
Application:
The main applications of needle punched nonwoven materials are
carpets, decorative felts, sports mats, furniture pads, shoes and
hats, shoulder pads, synthetic leather base fabric, coated base
fabric, ironing pads, filter materials, geotextile products, paper
making blankets and so on.
It can also be used for automotive interiors, roofs and other
insluation materials.
Trade information:
| Trade terms | FOB, CNF, or CIF |
| Lead time | 90 days after deposit. |
| Payment terms | 30% advance payment, 70% paid off before delivery. |
| Warranty | twelve (12) months after mechanical and electrical commissioning. |
| After-sale service | The seller is responsible for installation and debugging. The buyer
is responsible for the round-trip airplane tickets, accommodation,
medical treatment, safety and relative fees. In addition the buyers
should assign translator, workers, electrical cable (from machines
to control panel and from power to control panel) and tools for
installation to cooperate with the work. Installation cost is
USD180/Day/engineer and totally installation period is about 30-40
days depending on well cooperation of the buyer. |
